Step 1.
Open label holder and bottom cover as shown. Place label
roll on hub, insert labels onto sprocket pins until it extends below labeler.
Step 2.
Insert labels through opening of printing plate as shown.
Step 3.
Pull out labels toward sprocket pins, placing it on them as shown. Close bottom cover.
|
Step 4.
Labeler is ready for operation.
Step 5.
Pull pad holder toward outside horizontally, turning it
upward with thumb and forefinger.
Step 6.
Turn labeler sideways, easily ink roller comes off.
CAUTION: DO NOT RE-INK. THIS MAY RUIN PRINT BANDS.
|
